ENQUIRY

Please fill out the form below and we will contact you shortly.
Name :
Surname :
Contact Number :
E-mail :
Company :
Position :
Messages :

SHOWCASE

Hydrant Dispenser 3800 (ZS-137)
Hydrant dispenser with operational flexibility to refuel the largest commercial aircraft or the smallest regional jets. Flowrates up to 3,800LPM through the twin deck hoses, with a platform reach of 4.2m facilitating refuelling of the Airbus A380. Alternatively, a flowrate of up to 1.100 LPM is possible through the single hose reel. Deck hose pantograph and intake hose hydraulic lift are fitted as standard. The dispenser conforms to latest European Standards EN12312-5 and JIG1 Issue 11 requirements.
Features
Flow rate
Fuelling 3.800 LPM through 2 x under wing deck hose
1.100 LPM through 1 x under wing reel hose
Filtration Filter water separator constructed in carbon steel with epoxy coat lining meeting the latest requirements of IP1583 and IP1581 respectively and is fitted with high differential pressure shutdown system.
Meters SATAM PD type with EMR4
Hoses Aviation hoses meeting EN1361 type ‘C’
Intake Hose Ø100mm x 12m long
Reel Hose Under wing Ø50mm x 20m. long
Deck Hoses Ø63mm x 3.5m long
Intake Boom Retractable solid pipework extension giving an additional 3.0m length of intake hose.
Intake Coupler Ø100mm API coupler incorporating secondary pressure control sensed from either deck hose or reel hose fully compensating venturis.
Pit Buddy Pit coupling lifter, pneumatically assisted allowing break away of 3rd edition coupling meeting API 1584.
Shock Alleviator 32L capacity bladder type
Elevating platform Hydraulically operated scissor mechanism platform front mounted with floor to ground height, range from 1.5m to 4.2m. Platform equipped with raise/lower control and emergency lower control valve.
Interlocks Contactless intrinsically safe electrical system
Pipework Stainless steel in grade 304
Dumptank 100L capacity fully draining tank with visual contents window and Low,
high and high/high float switch system for automatic emptying
emergency cut off in event of overfilling.
Chassis Chassis manufacturer typically chosen from UD 4x2 format.
Other chassis manufacturers available by request.